VisionFive is the first generation of affordable RISC-V computers designed to run Linux. It is fully open-source with open-source software, open hardware design and RISC-V open architecture.
It is powered by RISC-V SiFive U74 Dual-Core 64-bit RV64GC ISA SoC with 4GB/8GB LPDDR4 RAM variants and has rich I/O peripherals such as USB 3.0 ports, 40-pin GPIO header, Gigabit Ethernet Connector, Micro-SD card slot and much more.
VisionFive also has rich AI features with Neural Network Engine and NVDLA Engine. It has onboard audio and video processing capabilities and has MIPI-CSI and MIPI-DSI connectors for video hardware. It has wireless capabilities with Wi-Fi and Bluetooth (BLE) and has a wide software compatibility including support for Fedora.
Truly open-source hardware, software and RISC-V open architecture
Powerful and rich AI features with Neural Network Engine and NVDLA Engine
Abundant I/O peripherals
Wireless connectivity with Wi-Fi and BLE
Onboard video and audio processing
Wide software compatibility including support for Fedora
Quick Start:https://rvspace.org/en/Product/VisionFive/Technical_Documents/VisionFive_Single_Board_Computer_Quick_Start_Guide
You need to prepare the following hardware before getting started with VisionFive：
VisionFive
16GB (or more) micro-SD card
micro-SD card reader
Computer (PC/Mac/Linux)
USB to serial converter (3.3 V I/O)
Ethernet cable
Power adapter (5 V / 3 A)
USB Type-C Cable
Firmware:
https://github.com/starfive-tech/Fedora_on_StarFive
Username: riscv (default)
Password: starfive
User Guide:
github : https://github.com/starfive-tech
Extended description：https://www.cnx-software.com/2021/11/27/visionfive-v1-risc-v-linux-sbc-resurrects-beaglev-single-board-computer/
